Target Stands – A quick review

Durability, portability, affordability. Pick two.

As a purveyor of fine AR500 rifle and pistol targets, I also build expensive target stands. Most customers don’t buy my target stands, because they are portable and durable, but pretty damn expensive due to the welding and AR500 use.

So, I’m here to talk about stands you can build yourself, achieving the affordability goal. You’ll have to decide if you want portable or durable, since you only get to pick one of the two. This writeup will deal with just the portable affordable target stands. If you can figure out how to make them durable, affordable, and portable, message me, let’s make a deal.

Many of the designs herein are ones that have been posted on www.reddit.com/r/guns in the past by fellow gunnitors, who I have asked permission of to repost. If you see your pictures, and I haven’t asked permission, let me know and I’ll fix it, but I’m pretty sure I’ve got you all.

The Shepherd Hook – can be purchased at your local garden shop, or made at home with a vice and some rebar. I made this one out of ¼” piece of rebar, using the target itself as the jig, after clamping the rebar to a bumper.

Portable, but any rifle round will destroy the rebar, and successive hits will rotate the target away from the shooter. Super cheap, and takes basically no time to build or set up.

The Rebar Ground Stand (credit to /u/recklessredneck) – Take a piece of ⅜” or heavier rebar, a vice, and a cheater bar, and bend that sucker up. OP used s-rings crimped with channel locks to mount his targets (which he bought from someone other than me, the jerk). Semi-portable (lugging that looks like a bitch), but it won’t rotate when you shoot it. Direct hits to the rebar from a rifle will end the fun for the day. Super cheap, little time invested.

The Steel A-Frame(credit to /u/zanemasterx) – Welding required, which may or may not be affordable to you. Flat bar and round stock used to build a versatile A-frame to hang targets off of. Quick to set up, with no fasteners, with a bungee across the top. However, as with many affordable and portable targets, a single rifle round can ruin your day. Can be built with scrap most welders have laying around, or for probably less than $30 worth steel from a local hardware store.

Single point standSalute Targets single point style, sorry for the shitty photo, my others have gone missing. Designed to hold a target using a 1.5×2.25” tab on the bottom of the target. Expensive, and fairly specialized, but in theory could be made at home. Won’t shred when you shoot it, made of AR500. Available in both portable and static version.

Hook and socket

Welded hook to go into a socket. I hate this style. Any time you weld on an AR target, you risk ruining the temper and the whole point of AR steel is that it’s tempered. Socket piece is on a piece of rectangular tubing which slips on a 2×4. Uses a matched 2×4 H-base.At least the hardware is hidden from the shooter, 2x4s are cheap. Available from GT Targets. Wouldn’t recommend it for rifle targets, due to the welding on the target.

2×4 single point(credit /u/eclypse). A stupidly simple 2×4 setup. Looks like it uses maybe ten linear feet of 2×4 (about $4) and a handful of screws. Utilizes the square hole on this target properly to hold a carriage bolt, which means with the wingnuton the back, you need exactly zero tools to assemble this in the field. Assembly time is going to be longer than the rebar setups to cut up all the 2x4s to fit, but this will take a lot of stray rounds before it needs a new $1 worth of 2×4 upright. A+ would review again.

Of course, no collection is complete without my design. The base is angle iron and holds 2x4s for sleepers and uprights. You can use a 2×4 across the top, or get a top plate for it, made of AR500. Designed to have carriage bolts run through the topper to suspend your targets.  Spendy at $115 for a 20” wide base and top plate, but has held up to machine guns and arfcommers, in Nevada, which says a lot.  Requires no tools to set up in the field.

There ya go. There are a ton more designs out there, including a bunch I didn’t feel like dealing with right now for permanent range setups using 4x4s and railroad ties. I’ll get those another time.

Feel free to post your own designs here, lemmi know in advance if you don’t want me to include them in future collections.

Leave a Reply